Error code
Bosch error code e126
Bosch error code e126: the door lock is not operating correctly. What the code covers, what to check first, and what it does not tell you — on ranges and wall ovens.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code e126, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
What it narrows down to
Door lock
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
After a self-clean cycle Oven door locked shut
A door that locked for self-clean and has not released. Most of them open once the cavity is genuinely cold — and the ones that do not have a published code of their own, which tells you how often this happens.
- Locked since a self-clean cycle
- Lock icon showing with the oven cold
- A grinding noise from the lock
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Supply voltage
Wired incorrectly
Zone overheated
Electronics overheated
Hot pan on the panel
Automatic time limit
Demo mode
Connection lost
Panel wet or covered
Controls locked
Self-maintenance
No power
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bosch error code e126
What this one means
The door lock is not operating correctly.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The lock motor
- Its cam
- The switch that reports the door is latched
Worth doing before you call
- Cancel the self-clean function
- Wait until the oven is completely cold — several hours, not one
- Start and cancel self-clean again, which runs the lock through its full travel
Then what
The most predictable oven repair there is, because it fails at a specific moment: the end of a cycle that took the cavity far above any cooking temperature. Do not lever at the door — the latch is a motorized cam and forcing it takes the hinges and sometimes the control with it.
This code is published for ranges and wall ovens. The full list of codes has the rest.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards