Error code
Bosch error code E7010
Bosch error code E7010: the appliance cannot reach your home network or the hood above it. What the code covers, what to check first, and what it does not tell you — on cooktops & rangetops and ranges and range hood.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E7010, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
E7010
The appliance cannot reach your home network or the hood above it
or call (305) 783-3552
What it narrows down to
Connection lost
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
The shortest list on the site Range hood not working
A fan that will not run, one stuck on a single speed, lights that have gone, or a hood that sounds healthy and moves nothing. Four different problems, and you can tell them apart from the kitchen floor.
- Fan does not run at all
- Runs but pulls almost nothing
- Lights out or flickering
On the same appliance
What else belongs to the cooktops & rangetops
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Supply voltage
Wired incorrectly
Zone overheated
Electronics overheated
Hot pan on the panel
Automatic time limit
Demo mode
Panel wet or covered
Controls locked
Self-maintenance
No power
General electronics
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bosch error code E7010
What this one means
The appliance cannot reach your home network or the hood above it.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- The network connection
- The pairing between the cooktop and the hood
What to try yourself
- Switch the appliance off and on again
- Check whether the router or its password changed recently
Then what
This is what a hood that used to switch on by itself and stopped is telling you. It is a setting rather than a repair, and it is worth re-pairing before anybody books anything.
This code is published for cooktops & rangetops and ranges and range hood. The full list of codes has the rest.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards