Error code
Bosch error code E:60 -2B
Bosch error code E:60 -2B: the unbalanced load detection has interrupted the spin. What the code covers, what to check first, and what it does not tell you — on washers.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code E:60 -2B, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
E:60 -2B
The unbalanced load detection has interrupted the spin
or call (305) 783-3552
What it narrows down to
Spin interrupted
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Often the load, not the machine Washer not spinning
Clothes soaking at the end of a cycle, or a spin that starts, slows and gives up. On a compact drum an uneven load stops the spin far more often than a failed part does.
- Clothes wet at the end of the cycle
- Spin starts, slows and stops
- Only happens with big items
On the same appliance
What else belongs to the washers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Drain pump blocked
Drain path restricted
Drain blocked or kinked
Pump obstructed
Water in the base
Dosing pump blocked
Door not locked
Inlet filters or pressure
Water not arriving
Too much detergent
Unbalanced load
Foam detected
The same digits mean different things on different equipment. Search the full code list
In more detail
About Bosch error code E:60 -2B
What this one means
The unbalanced load detection has interrupted the spin.
What the code covers
A published cause names a circuit rather than a component, which is the single most useful thing to know before ordering a part. This one covers:
- Laundry distribution in the drum
What to try yourself
- Redistribute the load by hand
- Mix large and small items — they settle around each other during the spin
Then what
The same protection as the imbalance code, caught at a different point in the cycle. Nothing is wrong with the machine.
This code is published for washers. The full list of codes has the rest.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards